UF – Form Information Inquiry
This command will cause the printer to send information about
Description
forms currently stored in the printer back to the host.
Syntax
UF
The printer will send the number of forms stored and the name
Remarks
of each form to the host through the RS-232 or USB port.
The UF command will be executed directly, without appending
any Linefeed.
Example
UF
UF006
TEST1
TEST2
TEST3
TEST4
TEST5
TEST6
ESim v5.12 for EasyCoder PD4—Programmer's Reference Manual
:Returns number of forms and all form names,
Chapter —Commands
for example:
10