Default Configuration; Printer Default Settings - Intermec PF8d User Manual

Appendix B — Default Settings

Default Configuration

Printer Default Settings

76
Use this appendix to view the default settings on the printer. If you
need to restore factory defaults at any time, you can use PrintSet or
the printer home page to reset the printer.
To reset the printer to factory defaults using Printset
• Use the Factory Default Wizard in the Printer Tasks box.
To reset the printer to factory defaults using the home page
1 Start a web browser.
2 In the address field type the IP address of your printer and press
Enter. The printer's home page appears.
3 Click Login and enter your administrator name and password.
The Set General Configuration page appears.
4 On the navigation pane, click Configuration. The Configuration
page appears.
5 Click TCP/IP > Reset.
6 Reboot the printer.
The following tables list the default values of the configuration
commands supported on the PF8d and PF8t printers. If you restore
the printer to factory default settings, these are the values it uses.
Serial Communication Parameters
Parameter
Baud rate
Data bits
Parity
Stop bits
Protocol
Default Value
9600
8
None
1
XON/XOFF
PF8d and PF8t Desktop Printer User's Guide