Code 2 Of - Intermec JG2010 User Manual

Hand-held computer (4mb)

Hide thumbs Also See for JG2010:

Table of Contents

Code 2 of 5

Enables or disables decoding of Code 2 of 5 symbology. Code 2 of 5 uses the

bars to encode information and the spaces to separate the individual bars. This

code is discrete and self-checking. You can only enable Code 2 of 5 if the

Interleaved 2 of 5 (I 2 of 5) code is disabled. If you enable I 2 of 5, Code

2 of 5 is automatically disabled.

where data consists of three digits as follows:

First digit:

third digits:

To disable Code 2 of 5, scan this bar code:

Disable Code 2 of 5

To enable Code 2 of 5:

1. Scan one of these bar codes:

Code 2 of 5, 3 Bar Start/Stop

Code 2 of 5, 2 Bar Start/Stop

Disable Code 2 of 5

Label Length

Code 2 of 5, 3 Bar Start/Stop

Code 2 of 5, 2 Bar Start/Stop

Configuration Command Reference