Display Backlight Timeout - Intermec JG2010 User Manual

JANUS 2010 Hand-Held Computer User's Manual (4MB)
code39
nugget
Decode Security (continued)

Display Backlight Timeout

Purpose:
Default:
Syntax:
Scan:
Or:
12-44
helconital
Moderate Decode Security
*$+CS1*
*$+CS1*
High Decode Security
*$+CS2*
*$+CS2*
Defines the amount of time the backlight remains on. The backlight timeout
setting significantly affects the reader's battery life. If you set a longer backlight
timeout value, you will use the power in the NiCad battery pack at a faster
rate.
10 seconds
DFdata
Acceptable values for data are:
00 Disabled
01 - 60 Timeout in seconds
To disable the backlight timeout, scan this bar code:
Disable Backlight Timeout
*$+DF00*
*$+DF00*
To set the backlight timeout:
1. Scan this bar code:
Enter Accumulate Mode / Set Backlight Timeout
*+/$+DF*
*+/$+DF*