Intermec JG2010 User Manual page 229

code39
nugget
FTA Command Descriptions and Syntax (continued)
Command Description
OPEN
Establishes a connection with
the host computer.
PUT
Copies a file from the reader to
the host computer.
RUPGRADE
Upgrades the reader's drive C
from the host. Stands for
"remote upgrade."
SERVER
Identifies the reader as the
server, not the client. You will
type all subsequent FTA
commands at the host.
helconital
Networking the Reader
Syntax
o [ port ]
where:
port
can be the COM port for the connection. If
you do not specify a port, the application
uses the first port with an active protocol
handler. Once a connection is open, you can

type other FTA commands or type
to exit.
p rfile [ hfile ]
where:
rfile is the path and filename of the file to be
transferred from the reader to the host.
hfile can be the destination path and filename
on the host. If you do not specify a hfile
name, the rfile name is used.
r file c
where:
file is the path and filename of the image file on
the host computer, and C is the drive to be
upgraded.
s [ port ]
where:
port is the COM port for the connection. If you do
not specify a port, the application uses the
first port with an active protocol handler.
6
6-47