Wiring specifications
To size output wiring, consider the following:
•
Total loop distance from the power supply to the controller, and then to the controlled device
NOTE Include the total distance of actual wire. For 2-conductor wires, this is twice the cable length.
•
Acceptable voltage drop in the wire from the controller to the controlled device
•
Resistance (Ohms) of the chosen wire gauge
•
Maximum current (Amps) the controlled device requires to operate
Wiring diagram legend
Gnd
HWV
SAT
SCR
Space temp
sensor
T55 (OPT)
– – –
TruVu™ VVTZC-E2
Installation and Start-up Guide
=
Ground
=
Hot water valve
=
Supply air temperature sensor
=
Silicon controlled rectifier
=
ZS sensors or Wireless Adapter for
wireless sensors
=
Alternate space temperature sensor
Field-supplied wiring
39
Wiring inputs and outputs
©2022 Carrier.
All rights reserved.