Fan Box 2-Stage Electric Heat; Wiring Field-Supplied Actuators To The Analog Output - Carrier TruVu VVTZC-E2 Installation And Startup Manual

Wiring inputs and outputs

Fan box 2-stage electric heat

Wiring field-supplied actuators to the analog output

You can wire a high-torque actuator or parallel actuators to the controller's 0–10 Vdc analog output.
High-torque actuator
You can wire one of the following Belimo actuators to the TV-VVTZC-E2's analog output instead of using the
controller's built-in, 45 in.-lb (4 Nm) actuator.
NMX24-MFT P-10028
AMX24-MFT P-10028
TruVu™ VVTZC-E2
Installation and Start-up Guide
90 in.-lb (10 Nm) actuator with 0–10 Vdc control and 0–10 Vdc feedback
180 in.-lb (20 Nm) actuator with 0–10 Vdc control and 0–10 Vdc feedback
50
©2022 Carrier.
All rights reserved.