Installing The Tv-Vvtzc-E2 - Carrier TruVu VVTZC-E2 Installation And Startup Manual

Installing the TV-VVTZC-E2

Installing the TV-VVTZC-E2
To install the TV-VVTZC-E2:
Mount the controller (page 11).
1
Wire the controller for power (page 13).
2
Set the controller's address (page 18, page 15).
3
Wire the controller to the BACnet/IP or BACnet/Ethernet network (page 21).
4
Wire the inputs and outputs (page 24).
5
TruVu™ VVTZC-E2
Installation and Start-up Guide
10
©2022 Carrier.
All rights reserved.