Downloading The Tv-Vvtzc-E2; To Download From The I-Vu® Interface - Carrier TruVu VVTZC-E2 Installation And Startup Manual

Downloading the TV-VVTZC-E2

Downloading the TV-VVTZC-E2
Download to send the following items to the TV-VVTZC-E2:
Item
Up to 2 control
programs, depending on
available memory
drv_fwex driver NOTE
Editable properties
Schedules
If you change any of the above items or the TV-VVTZC-E2's address after the initial download, you must download
again. The first download takes longer than subsequent downloads.
CAUTIONS
•
The TV-VVTZC-E2 will lose stored data, such as trends, when you download.
•
The TV-VVTZC-E2 outputs will not maintain their states when you download. This could cause equipment
controlled by the TV-VVTZC-E2 to shut down and/or restart.
To download from the i-Vu® interface
On the i-Vu® Network tree, select the TV-VVTZC-E2.
1
Click Downloads.
2
Do one of the following:
3
If the controller is in the Downloads list, go to step 4.
○
If the controller is not in the list:
○
a. Click Add.
b. In the pop-up, select the controller.
c. Select All Content.
d. Click Add.
e. Click Close.
Select the controller in the Downloads list.
4
Click Start.
5
NOTES
•
If the download fails, locate, and resolve the problem, then retry the download.
•
You can also download from the Devices page.
TruVu™ VVTZC-E2
Installation and Start-up Guide
Notes
Must be in i-Vux.x\webroot\<system_name>\programs.
The driver must be in WebCTRLx.x\webroot\<system_name>\drivers.
NOTE To verify that you have the driver's latest version, go to the Carrier Partner
Community website and compare the latest version to the TV-VVTZC-E2's driver in
SiteBuilder.
68
©2022 Carrier.
All rights reserved.