Linkage - Carrier TruVu VVTZC-E2 Installation And Startup Manual

Point Name/Description
Airside Linkage Status – If the controller is the VVT Master, Alarm indicates that it lost
Linkage communications with the air source. If the controller is a slave, Alarm indicates
that it lost Linkage communications with the VVT master.
Smart Valve Alarm – Indicates if the Smart Valve fails.
Heat Valve Cycling – Indicates if the heating valve exceeds the limit of cycles per
period.
Heat Valve Fail – Indicates if the heating valve fails.

Linkage

Navigation: i-Vu® / Field Assistant:
Point Name/Description
Airside Linkage
Click Linkage Collector/Linkage Provider to access the microblock popup's Summary
and Details tabs. See the microblock popup's Help for more detailed explanations.
Linkage Collector – Set the Number of Providers to the total number of controllers in
the linked system, including the bypass and VVT Master.
Linkage Provider – Enter the MS/TP Network Number and MAC Address of the linked
air source controller.
Network Number
Address
NOTE If you change the Network Number or Address, you must use the i-Vu®
application or Field Assistant to cycle power to the controller for the changes to take
effect.
Airside Linkage Status – If Active, the controller is part of a linked system. If Not Active,
the controller is a stand-alone device.
Linkage Zone Type – Select whether the controller is a Master or a slave.
Select VAV Master if the controller is the Master or a sub-master in a VAV application.
Select VVT Master only if the controller is the Master in a VVT application. VVT
applications do not support sub-masters.
TruVu™ VVTZC-E2
Installation and Start-up Guide
Properties Equipment Linkage
> >
125
Appendix A: TV-VVTZC-E2 Points/Properties
Range
R: Normal/Alarm
R: Normal/Alarm
R: Normal/Alarm
R: Normal/Alarm
Default/Range
D: 1
R: 1 to 32
D: 0
R: 0 to 65535
D: 0
R: 0 to 99
R: Not Active/Active
D: Slave
R: Slave
VVT Master
VAV Master
©2022 Carrier.
All rights reserved.