Fm Start Rate - HP ESG Series User Manual

FM Start Rate

Use this softkey to change the starting internal modulation frequency for
swept-sine frequency modulation. To change the value, press the softkey once.
The current value for the FM start rate is displayed in the active entry area. To
enter a new value, rotate the front panel knob until the desired value is displayed,
use the up and down arrow keys, or enter the value using the numeric keypad and
press the or terminator softkey. The range of values allowed is 0.1 Hz to
Hz kHz
50 kHz. The minimum increment allowed is 0.1 Hz.
This softkey is coupled to the
softkey in the FM Dual-Sine Menu. Any value set for
FM Tone 1 Rate
is reflected in the
FM Start Rate
if you change the value for either the
softkey, the value for
FM Start Rate
Softkey Location: Press
FM Start Rate
Status after Normal Preset: 400.0 Hz
SCPI Commands:
[:SOURce]:FM[1]|2:INTernal[1]:FREQuency <val><unit>
[:SOURce]:FM[1]|2:INTernal[1]:FREQuency?
softkey in the initial FM Menu and the
FM Rate
and
FM Rate FM Tone 1 Rate
softkey or the
FM Rate
is changed to match.
Φ
, ,
FM/ M More (1 of 2) FM Waveform
Hardkey and Softkey Reference
softkeys. Conversely,
FM Tone 1 Rate
, ,
Swept-Sine
FM
5-43