Trigger In Polarity Neg Pos - HP ESG Series User Manual

Trigger In Polarity Neg Pos

Hardkey and Softkey Reference
FM
Press this softkey to toggle between a negative TTL level trigger (0 V) and a
positive TTL level trigger (+5 V) for externally triggering swept-sine frequency
modulation.
This softkey is coupled to the
Φ
AM, M, and LF Out, and to the
the Sweep/List Menu. If you set the
Swept-Sine Menu to
Neg
Φ
for swept-sine AM, M, and LF Out. And, in addition, if the step or list sweep
trigger is set to , the trigger selection will automatically be changed to
Ext Pos
. The same softkeys will toggle to
Ext Pos
Swept-Sine FM Menu.
Conversely, if the
Trigger In Slope Neg Pos
Φ
AM, M, or LF Out menus, it will cause the swept-sine FM softkey to toggle
also. This is also true for the
selections.
Softkey Location: Press
Trigger In Polarity Neg Pos
Status after Normal Preset: Pos
SCPI Commands:
:TRIGger[:SEQuence]:SLOPe POSitive|NEGative
:TRIGger[:SEQuence]:SLOPe?
5-50
Trigger In Polarity Neg Pos
and
Ext Neg Ext Pos
Trigger In Polarity Neg Pos
, the
Trigger In Polarity Neg Pos
or to
Pos
softkey is toggled in the swept-sine
and
Ext Neg Ext Pos
Φ
, ,
FM/ M More (1 of 2) FM Waveform
softkey for swept-sine
sweep trigger selections in
softkey in the FM
softkey is also set to
if you select
Ext Pos Pos
step or list sweep trigger
, ,
Swept-Sine
Neg
in the