Pulse; Ramp - HP ESG Series User Manual

Pulse

Ramp

This softkey lets you specify pulse as the waveform for the LF output signal. The
signal shape can only be specified when you have selected the internal source to
operate as a function generator. Use the
to define the pulse shape.
This softkey is only active when you have selected the internal source to operate
as a function generator.
Softkey Location: Press
,
LF Out Waveform More 1 of 2
Status after Normal Preset: LF Out Waveform is set to Sine
SCPI Commands:
[:SOURce]:LFOutput:FUNCtion:SHAPe PULSe
[:SOURce]:LFOutput:FUNCtion:SHAPe?
This softkey lets you specify ramp as the waveform for the LF output signal.
This softkey is only active when you have selected the internal source to operate
as a function generator.
Softkey Location: Press
,
LF Out Waveform Ramp
Status after Normal Preset: LF Out Waveform is set to Sine
SCPI Commands:
[:SOURce]:LFOutput:FUNCtion:SHAPe RAMP
[:SOURce]:LFOutput:FUNCtion:SHAPe?
LF Out Period
, ,
LF Out LF Out Source
,
Pulse
, ,
LF Out LF Out Source
Hardkey and Softkey Reference
and
LF Out Width
,
Function Generator
,
Function Generator
LF Out
softkeys
5-81