Load From Selected File; Load List From Step Sweep; Load/Store - HP ESG Series User Manual

Load From Selected File

Load List From Step Sweep

Load/Store

Press this softkey to load the list sweep data from a file into the current sweep list.
Use the arrow keys to highlight the desired sweep list file. Press
and the list sweep data from the selected file is loaded into the
Selected File
current list sweep. You can only have one list sweep at a time so the existing list
sweep data will be lost unless it is first stored to a file. This softkey is inactive
unless at least one list sweep data file has been stored to memory.
Softkey Location: Press
,
Load/Store Load From Selected File
SCPI Commands:
:MEMory:LOAD:LIST <filename>
:MMEMory:LOAD:LIST <filename>
Press this softkey to eliminate the existing sweep list data and replace it with the
step sweep data points. You can only have one sweep list at a time so be certain
that you wish to delete the existing list. You cannot recover the sweep list data
once you press
Load List From Step Sweep
Softkey Location: Press
Load List From Step Sweep
Pressing this softkey reveals a menu of choices for storing list sweep data to a file
or loading list sweep data from a file into the current sweep list. In this menu you
can also delete existing list sweep files.
Softkey Location: Press
Load/Store
,
Sweep/List Configure List Sweep
.
,
Sweep/List Configure List Sweep
,
Sweep/List Configure List Sweep
Hardkey and Softkey Reference
Sweep/List
Load List From
, ,
More (1 of 2)
, ,
More (1 of 2)
, ,
More (1 of 2)
5-157