Manual Mode Off On; Manual Point - HP ESG Series User Manual

Manual Mode Off On

Manual Point

Hardkey and Softkey Reference
Sweep/List
This softkey toggles manual selection of the current sweep point on and off. When
is , the selected sweep/list point controls the frequency and
Manual Mode On
amplitude according to the sweep type. The current point in the sweep is
displayed in the active entry area and also below the
softkey is disabled when
Softkey Location: Press
Status after Normal Preset: Off
SCPI Commands:
[:SOURce]:LIST:MODE AUTO|MANual
[:SOURce]:LIST:MODE?
Press this softkey to choose a point in the sweep list. When
selected sweep/list point controls the frequency and amplitude according to the
sweep type. The current point number is shown in the active entry area when you
press . The frequency of the point is shown in the frequency area of
Manual Point
the display. The amplitude of the point is shown in the amplitude area of the
display. You can choose which point to sweep using the up and down arrow keys,
the front panel knob, or by entering the point number desired using the numeric
keypad and pressing the
is set to
Manual Mode Off On
Softkey Location: Press
Status after Normal Preset: 1
SCPI Commands:
[:SOURce]:LIST:MANual <val>
[:SOURce]:LIST:MANual?
5-158
is set to .
Sweep Off
,
Sweep/List More (1 of 2)
terminator softkey. This softkey is disabled when
Enter
.
Off
,
Sweep/List More (1 of 2)
softkey. This
Manual Point
,
Manual Mode Off On
Manual Mode
,
Manual Point
is , the
On