Table of Contents
Advertisement
RF On/Off
This front panel hardkey toggles the RF signal on and off at the RF OUTPUT
connector. Although you can configure and engage various modulations, no signal
is available at the RF OUTPUT connector until
annunciator is always turned on in the display to indicate whether RF is turned on
or off.
Status after Normal Preset: RF Off
SCPI Commands:
:OUTPut[:STATe] ON|OFF|1|0
:OUTPut[:STATe]?
Hardkey and Softkey Reference
is set to
. An
RF On/Off
On
RF On/Off
5-139
Hide quick links:
Advertisement
Table of Contents
