Fm Off On - HP ESG Series User Manual

FM Off On

This softkey toggles the frequency modulation on or off for whichever FM path
configuration (
FM Path 1
although you can turn on frequency modulation with this softkey, the RF carrier is
modulated by the enabled modulation only when you have also set
. Whenever frequency modulation is enabled, the
On
in the display.
There are two paths for FM modulation which can be simultaneously enabled as
long as they use different sources (Int, Ext1, or Ext2).
maximum rate of 1 MHz.
. The modulation signals from both paths are summed internally for
FM Path 1
composite modulation.
Softkey Location: Press
Status after Normal Preset: Off
SCPI Commands:
[:SOURce]:FM[1]|2:STATe ON|OFF|1|0
[:SOURce]:FM[1]|2:STATe?
or ) you have selected. Notice, however that
FM Path 2
must be set to a deviation less than or equal to
FM Path 2
Φ
,
FM/ M FM Off On
Hardkey and Softkey Reference
Mod On/Off
annunciator is turned on
FM
is limited to a
FM Path 2
FM
to
5-39