Scpi; Screen Saver Delay - HP ESG Series User Manual

SCPI

Screen Saver Delay

Hardkey and Softkey Reference
Utility
This softkey is one of the choices in both the Preset Language menu and the
Remote Language menu. Press either the
softkey to view these menus. SCPI (Standard Commands for
Remote Language
Programmable Instruments) is the language chosen for remote implementation of
all supported instrument features. Choosing
allows you to select this remote language as the default after a normal preset.
Choosing in the Remote Language menu allows you to immediately change
SCPI
the signal generator to use this remote language.
Softkey Location: Press
or press ,
Utility HP-IB/RS-232
SCPI Commands:
:SYSTem:PRESet:LANGuage "SCPI"
:SYSTem:PRESet:LANGuage?
:SYSTem:LANGuage "SCPI"
:SYSTem:LANGuage?
This softkey sets the period of time before the screen saver is activated. The
screen saver delay is set to 1 hour at the factory. You can change the delay by
pressing , ,
Utility Display
displayed in the active entry area. To enter a new value, rotate the front panel
knob, use the up and down arrow keys, or enter the value using the numeric
keypad and press the
Enter
through 12 hours in 1 hour increments.
Screen saver delay is a persistent state; it is not affected by an instrument preset or
by a power cycle.
Softkey Location: Press
SCPI Commands:
:SYSTem:SSAVer:DELay <val>
:SYSTem:SSAVer:DELay?
5-188
Preset Language
SCPI
,
Utility Power On/Preset
, ,
Remote Language
. The current value for delay is
Screen Saver Delay
terminator softkey. The range of values allowed is 1
, ,
Utility Display Screen Saver Delay
softkey or the
in the Preset Language menu
, ,
Preset Language SCPI
SCPI