Bus; Dcfm/Dc Φ M Cal; Dual-Sine - HP ESG Series User Manual

Bus

Φ
DCFM/DC M Cal

Dual-Sine

Hardkey and Softkey Reference
Phase Modulation
This softkey is one of the choices in the
selected, you use the HP-IB to trigger single sweeps of swept-sine phase
modulation.
Softkey Location: Press
Φ
,
More (1 of 2) M Waveform
Status after Normal Preset:
SCPI Commands:
[:SOURce]:PM[1]|2:INTernal[1]:SWEep:TRIGger BUS
[:SOURce]:PM[1]|2:INTernal[1]:SWEep:TRIGger?
Pressing this softkey initiates a DC
offset in DC phase modulation so that the carrier phase remains the same with no
modulation applied. External, DC-coupled
command is executed.
Softkey Location: Press
Φ
,
More (1 of 2) DCFM/DC
SCPI Commands:
:CALibration:DCFM
Pressing this softkey reveals a menu of choices for setting the dual-sine phase
modulation parameters. In this menu you can set the
tones. In addition you can set a ratio of the tone 2
deviation.
Softkey Location: Press
Φ
,
More (1 of 2) M Waveform
SCPI Commands:
[:SOURce]:PM[1]|2:INTernal[1]:FUNCtion:SHAPe DUALsine
[:SOURce]:PM[1]|2:INTernal[1]:FUNCtion:SHAPe?
5-106
Φ
M Sweep Trigger menu. With
Φ
hardkey, toggle
FM/ M
Φ
, ,
Swept-Sine M Sweep Trigger
Φ
M sweep trigger is set to Immediate
Φ
M calibration. This calibration eliminates the
Φ
M must be active when this
Φ
hardkey, toggle
FM/ M
M Cal
Φ
hardkey, toggle
FM/ M
,
Dual-Sine
Φ Φ
softkey to , press
FM/ M M
,
Bus
Φ Φ
softkey to , press
FM/ M M
Φ
M rates for two separate
Φ
M deviation to the tone 1
Φ Φ
softkey to , press
FM/ M M
Bus
Φ
M