Swept-Sine; Triangle - HP ESG Series User Manual

Swept-Sine

Triangle

Pressing this softkey reveals a menu of choices for setting the swept-sine low
frequency output. In this menu you can set the LF start and stop frequency and the
sweep time. You can also set the trigger for the swept-sine output, and the polarity
of the TRIGGER IN and TRIGGER OUT signals.
Softkey Location: Press
,
LF Out Waveform Swept-Sine
SCPI Commands:
[:SOURce]:LFOutput:FUNCtion:SHAPe SWEPtsine
[:SOURce]:LFOutput:FUNCtion:SHAPe?
This softkey lets you specify triangle as the waveform for the LF output signal.
This softkey is only active when you have selected the internal source to operate
as a function generator.
Softkey Location: Press
,
LF Out Waveform Triangle
Status after Normal Preset: LF Out Waveform is set to Sine
SCPI Commands:
[:SOURce]:LFOutput:FUNCtion:SHAPe TRIangle
[:SOURce]:LFOutput:FUNCtion:SHAPe?
, ,
LF Out LF Out Source
, ,
LF Out LF Out Source
Hardkey and Softkey Reference
,
Function Generator
,
Function Generator
LF Out
5-83