Immediate; Internal - HP ESG Series User Manual

Immediate

Internal

This softkey is one of the choices in the FM Sweep Trigger menu. Choosing
immediately triggers swept-sine frequency modulation in a continuous
Immediate
mode. To stop the sweep, choose a different trigger such as
waveform to something other than
Softkey Location: Press
,
FM Sweep Trigger Immediate
Status after Normal Preset: FM sweep trigger is set to Immediate
SCPI Commands:
[:SOURce]:FM[1]|2:INTernal[1]:SWEep:TRIGger IMMediate
[:SOURce]:FM[1]|2:INTernal[1]:SWEep:TRIGger?
This softkey lets you internally generate an AC-coupled, frequency modulation
signal.
The internal source has multiple uses but can be used for only one modulation at a
time. If, for example you were using the internal source in an amplitude
modulation configuration for
also use the internal source, the signal generator would turn off
assign the internal source to your
Softkey Location: Press
SCPI Commands:
[:SOURce]:FM[1]|2:SOURce INT[1]
[:SOURce]:FM[1]|2:SOURce?
.
Swept-Sine
Φ
, ,
FM/ M More (1 of 2) FM Waveform
, and then you configured
AM Path 1
configuration.
FM Path 2
Φ
, ,
FM/ M FM Source Internal
Hardkey and Softkey Reference
, or set the
Ext
, ,
Swept-Sine
FM Path 2
and
AM Path 1
FM
to
5-47