Preset Language; Preset Normal User - HP ESG Series User Manual

Preset Language

Preset Normal User

or HP 8656/57-compatible language. (Refer to the
description, in this section.)
• Set the signal generator's reverse power protection to the factory-defined state or to an
HP 8648-equivalent state. (Refer to the
softkey description.)
Softkey Location: Press
Pressing this softkey reveals a menu of choices for selecting the programming
language that is implemented after the
between SCPI, which is the language chosen for the signal generator for remote
implementation of all features, HP 8648-compatible, and four versions of HP
8656/57-compatible languages. The HP 8648- and 8656/67-compatible languages
are provided for remote implementation of some features so that this signal
generator can be compatible with systems that use those instruments. Refer to the
programming guide for specifics on which commands are implemented.
The preset language is a persistent state; it is not affected by an instrument preset
or by a power cycle.
Softkey Location: Press
SCPI Commands:
:SYSTem:PRESet:LANGuage?
This softkey toggles the preset state between the factory-defined and the
user-defined states. The instrument state conditions for the factory-defined preset
state are described in the
conditions for the user-defined preset state. Refer to the
description in this section.
The preset state is a persistent state; it is not changed by an instrument preset or by
a power cycle.
Softkey Location: Press
SCPI Commands:
:SYSTem:PRESet:TYPE NORMal|USER
:SYSTem:PRESet:TYPE?
Reverse Power Protection Normal HP8648
,
Utility Power On/Preset
key is pressed. You can choose
Preset
,
Utility Power On/Preset
section. You choose the instrument state
Preset
,
Utility Power On/Preset
Hardkey and Softkey Reference
softkey
Preset Language
,
Preset Language
Save User Preset
,
Preset Normal User
Utility
softkey
5-181