Ref Osc Coarse; Ref Osc Fine; Remote Language; Reset - HP ESG Series User Manual

Ref Osc Coarse

Ref Osc Fine

Remote Language

Reset RS-232
This softkey is provided for adjusting the internal reference oscillator. This
adjustment is for use by service personnel only. Refer to the calibration guide for
more information.
Softkey Location: Press
Reference Oscillator Adjustment
This softkey is provided for adjusting the internal reference oscillator. This
adjustment is for use by service personnel only. Refer to the calibration guide for
more information.
Softkey Location: Press
Reference Oscillator Adjustment
Pressing this softkey reveals a menu of choices for immediately changing the
signal generator's remote language. You can choose between SCPI, which is the
language chosen for the signal generator for remote implementation of all
features, HP 8648-compatible, and four versions of HP 8656/57-compatible
languages. The HP 8648- and 8656/67-compatible languages are provided for
remote implementation of some features so that this signal generator can be
compatible with systems that use those instruments. Refer to the programming
guide for specifics on which commands are implemented.
Softkey Location: Press
Status after Normal Preset: SCPI
SCPI Commands:
:SYSTem:LANGuage?
Press this softkey to perform a clean-up on the RS-232 buffer which will discard
any unprocessed SCPI input received over RS-232 and places the RS-232
connection in a mode which can detect the optional remote interface. All other
RS-232 communication parameters (such as baud rate) are unaffected.
Softkey Location: Press
,
Utility Instrument Adjustments
,
Ref Osc Coarse
,
Utility Instrument Adjustments
,
Ref Osc Fine
, ,
Utility HP-IB/RS-232 Remote Language
, ,
Utility HP-IB/RS-232 Reset RS-232
Hardkey and Softkey Reference
,
,
Utility
5-183