Fm Tone 2 Rate; Fm Waveform - HP ESG Series User Manual

FM Tone 2 Rate

FM Waveform

Hardkey and Softkey Reference
FM
Press this softkey to set the internal modulation frequency for the FM tone 2.
Enter the desired rate using the up and down arrow keys, the front panel knob, or
enter a value using the numeric keypad and press the
The range of values allowed is 0.1 Hz through 50 kHz. The minimum increment
allowed is 0.1 Hz.
This softkey is coupled to the
Any value set for
FM Tone 2 Rate
Conversely, if you change the value for the
is changed to match.
FM Tone 2 Rate
Softkey Location: Press
FM Tone 2 Rate
Status after Normal Preset: 400.0 Hz
SCPI Commands:
[:SOURce]:FM[1]|2:INTernal[1]:FREQuency:ALTernate <val><unit>
[:SOURce]:FM[1]|2:INTernal[1]:FREQuency:ALTernate?
Pressing this softkey reveals a menu of FM waveform choices for your
and configurations. Select from sine, triangle, square, ramp, noise,
FM Path 2
dual-sine, and swept-sine waveforms. Notice that your waveform selection
applies only to which ever FM path configuration you have currently selected.
Softkey Location: Press
Status after Normal Preset: Sine
SCPI Commands:
[:SOURce]:FM[1]|2:INTernal[1]:FUNCtion:SHAPe?
5-46
softkey in the FM Swept-Sine Menu.
FM Stop Rate
is reflected in the
FM Stop Rate
Φ
, ,
FM/ M More (1 of 2) FM Waveform
Φ
, ,
FM/ M More (1 of 2) FM Waveform
or terminator softkey.
kHz Hz
softkey.
FM Stop Rate
softkey, the value for
, ,
Dual-Sine
FM Path 1