Table of Contents
Advertisement
Delivery
7.9 Adjusting the lap belt
CAUTION
Incorrect approach to the adjustment process
Injuries, malpositions, user discomfort due to adjustment errors
► The qualified personnel is responsible for the individual positioning and fitting of the belt system.
► Adjusting the belt system too tightly may lead to unnecessary pain or user discomfort.
► Adjusting the belt system too loosely can cause the user to slide into a dangerous position. In addition, the
fastening snaps could open unintentionally if they slide against hard parts of clothing (e.g. buttons).
CAUTION
Lack of instruction
Injuries, malpositions, illness of the user due to incorrect information
► The qualified personnel is responsible for making sure that the user and/or attendant/nursing staff has under
stood the proper adjustment, use, maintenance and care of the belt system.
► In particular, ensure that the user and/or attendant/care staff knows how to quickly loosen and open the
product to avoid delays in case of emergency.
Information on the settings can be found in the manufacturer's instructions for use accompanying each product.
8 Delivery
8.1 Final inspection
A final check must be carried out before the wheelchair can be handed over:
•
Do the quick-release axles rotate freely and lock securely?
•
Have the tyres been correctly inflated?
INFORMATION: The correct tyre pressure is printed on the tyre sidewall. For drive wheels with high-
pressure tyres, the minimum air pressure is 7 bar.
•
Only after adjustment: Have the brakes (wheel locks) been adjusted correctly?
•
Only after adjustments: Has the anti-tipper been adjusted correctly?
8.2 Transport to the customer
The wheelchair should be transported to the user in disassembled state using the outer packaging.
8.3 Handing over the product
WARNING
Lack of instruction
Tipping over, falling of the user due to lack of knowledge
► Instruct the user or the attendant in the proper use of the product when handing it over.
The following steps must be performed for the safe delivery of the product:
•
A sitting test has to be conducted with the user of the product. Pay special attention to proper positioning
according to medical considerations.
•
The user and any attendants must be instructed in the safe use of the product. In particular, the enclosed
instructions for use are to be used.
•
The instructions for use must be given to the user/attendant upon delivery of the wheelchair.
Depending on equipment: The supplied instructions for use for accessories have to be handed over in addi
•
tion.
9 Use
9.1 Instructions for use
•
Attaching loads (e.g. backpacks) can adversely affect stability. Therefore, suspending additional loads on the
wheelchair is not permitted.
22
Invader 480S26=10000_K
Advertisement
Table of Contents
