Anti-Tipper - Otto Bock Invader 480S26 10000 K Instructions For Use Manual

Table of Contents

Advertisement

Use
Activating/deactivating the knee lever wheel lock
1) Push the handle of the knee lever wheel lock forward (see fig. 55).
→ The wheel lock bolt secures the wheel.
2) Pull the wheel lock lever upwards (see fig. 11).
→ The wheel lock lever releases the wheel.
55
Activating/deactivating the scissor wheel lock
► Reach under the seat and pull the handle of the scissor wheel lock rearwards from the side (see fig. 57).
→ The wheel lock bolt secures the wheel.
► Pull the handle of the scissor wheel lock forwards to unfold (see fig. 58).
→ The wheel lock bolt releases the wheel.
57

9.11 Anti-tipper

WARNING
Anti-tipper not activated
Tipping over, falling of the user due to improper operation of a safety device
► Ensure that an installed anti-tipper is activated before travelling over obstacles and on inclines.
► The anti-tipper has to engage audibly prior to use. Proper engagement must be checked by the user or an
attendant.
► The use of an anti-tipper is highly recommended for transfemoral amputees and inexperienced users.
WARNING
Incorrectly adjusted anti-tipper
Tipping over, falling of the user due to errors in handling the product
► If only one attendant helps in overcoming steps, the attendant must first deactivate the anti-tipper so that it
cannot collide with the steps during transport.
► The attendant must activate the anti-tipper again after overcoming the steps.
32
56
58
5 mm
Invader 480S26=10000_K

Advertisement

Table of Contents
loading

Table of Contents