Lap Belt; Four-Point Belt - Otto Bock Kimba Neo Instructions For Use Manual

WARNING
Incorrect application of the belt system/positioning aid
Strangulation, suffocation due to incorrectly positioned safety belts/positioning aids
► Follow the instructions for proper application so that the user cannot slip into a position that would endanger
him or her.
► Note that the user's back must be up against the back upholstery when securing the belt system/positioning
aid and during use of the product.
► Do not use safety belts or positioning aids if the user is able to sit without them.
The product can be equipped with different types of safety belts.
The option has been installed and preset by qualified personnel. If the option has been adjusted too tightly or can­
not be engaged, the safety belt can be subsequently adjusted.

6.3.2.1 Lap belt

The seating unit can be equipped with a lap belt. It provides additional support for the pelvis and keeps the user
from sliding out of the seat (see Fig. 20).
Adjusting the belt
1) Pull the belt out of the belt restraint (see Fig. 21, item 1).
2) Close the belt buckle firmly (see Fig. 21, item 2) and pull the belt in the desired direction.
Make sure that the belt extends at least 20 mm beyond the buckle so that the belt restraint can be pushed over
the loose end.
3) Thread the belt back into the belt restraint (see Fig. 21, item 1).
Using the belt
1) To open the belt buckle, push the "press" button (see Fig. 20, item 1).
2) Sit the user into the seat.
3) To close the belt, slide the metal tab into the buckle until you hear it click.
20

6.3.2.2 Four-point belt

The seating unit can be equipped with a four-point belt (see Fig. 23). It additionally stabilises the pelvis and
shoulders and prevents the user from sliding out of the seat. The buckle makes it easy to get in and out.
Adjusting the belt
1) The setting of the lap belt part corresponds to the setting of the lap belt (see Page 15)
INFORMATION: If the lap belt was run under the padding, the closures of the backrest pad must be
opened.
2) Adjust the shoulder straps using the clip buckles at the base of the backrest (see Fig. 27).
→ The four-point belt is adjusted correctly when the closed belt buckle lies against the child's abdomen (see
Fig. 24).
Using the belt
1) Press the release button to open the belt (see Fig. 23, item 1).
2) Move the shoulder/lap belt straps to the side.
3) Sit the user into the seat.
Kimba Neo
21
Use
Ottobock | 15