Table of Contents
Advertisement
The combination of caster wheels and caster forks ensures the ability to hold a straight line and navigate bends
securely.
The caster wheels (Ø 3" – 6") and caster forks were installed by qualified personnel according to the order.
52
54
9.9.1 Approach in case of stiffness
In case of stiffness, the caster wheel axles should be cleaned and oiled.
Oiling the caster axle
1) Remove dirt (such as hairs) from the caster axle between the caster wheel and caster fork.
2) Lubricate the caster axle between the caster wheel and caster fork with a few drops of thin, resin-free oil (sew
ing machine oil).
9.10 Wheel locks
The wheel locks secure the parked wheelchair against rolling away.
Different wheel lock types may be installed depending on the order.
9.10.1 Using the wheel locks
WARNING
Improper use of the wheel lock
Falls due to abrupt braking, rolling away of the product, crushing of hands
► Do not use the wheel lock as a driving brake.
► Always engage the wheel lock on both sides.
► Engage the wheel lock to prevent the product from moving when it is parked on uneven ground or during
transfers (e.g. into a car).
► Do not reach between the rear wheel and the wheel lock when driving the product.
► Ensure that the knee lever wheel lock is properly adjusted (max. 5 mm gap to the tyre). The lock bolt must
lock the drive wheel securely when stationary.
► Please contact the qualified personnel who adjusted your product for readjustment of the wheel lock.
Invader 480S26=10000_K
53
Use
31
Advertisement
Table of Contents
