Table of Contents
Advertisement
9.17 Use in vehicles for transporting persons with reduced mobility
WARNING
Improper use in vehicles for transporting persons with reduced mobility
Risk of serious injury when using the product as a seat
► The product has not been approved by the manufacturer for use as a seat in vehicles for transporting persons
with reduced mobility.
► In vehicles for transporting persons with reduced mobility, only use the seats installed in the vehicle with the
corresponding personal restraint systems.
► Information on the current status of our measures is available from the qualified personnel.
The Invader wheelchair has not been approved by the manufacturer for use as a seat in vehicles for transporting
persons with reduced mobility.
9.18 Care
9.18.1 Cleaning
9.18.1.1 Cleaning by hand
1) Clean the padding and upholstery with warm water and a mild detergent.
2) Remove any spots with a sponge or a soft brush.
3) Rinse with clear water and let the components dry.
Important information on cleaning
•
Do not use any aggressive cleaners, solvents or hard brushes etc.
•
Clean plastic parts, frame parts and the chassis and wheels with a mild cleaner and a damp cloth. Dry thor
oughly afterwards.
•
To care for aluminium or chrome, use conventional aluminium or chrome care and cleaning products.
•
Do not spray the product with a pressure washer.
9.18.1.2 Cleaning the seat cushion
Standard seat cushion
► Clean the seat cushion according to the attached care label.
Seat cushion with foam core
1) Open the zipper and remove the foam core (see fig. 70).
2) Clean the cover according to the attached care label.
3) Wash all foam parts by hand at 40°C using a mild, environmentally friendly detergent. Allow to air dry.
4) Reinsert the foam core with proper alignment. Close the zipper.
70
Important information on cleaning
•
For more information on cleaning seat cushions, see the care instructions on the product or the supplied
instructions for use.
Invader 480S26=10000_K
Use
37
Advertisement
Table of Contents
