12.2 Warranty
Further information on the warranty terms and conditions can be obtained from the qualified personnel that has fit
ted this product or the manufacturer's service (see inside back cover for addresses).
12.3 Service life
Expected lifetime: 4 years
The design, manufacturing and requirements for the intended use of the product are based on the expected life
time. These also include the requirements for maintenance, ensuring effectiveness and the safety of the product.
13 Technical data
INFORMATION
All information in the following tables refers to the respective custom-made model. The dimensional tolerance is
+/-15 mm, +/-2°.
Dimensions
Frame length
Lower leg length [mm]
Minimum frame length [mm]
Minimum rear seat height [mm]
Maximum front/rear seat height [mm]
3)
Width
Overall height
Back height [mm]
Armrest height
Length with footrest
Length without footrest
Seat cushion thickness [mm]
Wheelbase with integrated wheelbase extension [mm]
Wheels
Caster wheel Ø ["]
Rear wheel Ø ["]
High-pressure tyres
Rear wheel with quick-release axle Ø [mm]
Tyre pressure [bar]
High-pressure tyres
Permissible ascent/descent
Permissible ascent [°]
Permissible descent [°]
Stability against tipping [°]
Weights
Maximum payload (maximum user weight) [kg]
Transport weight [kg]
1)
Minimum possible rear seat height at lowest configuration (rear wheels: 24", camber: 6°); with horizontal seat
surface
2)
Without seat padding, to top of seat frame
3)
Ready for use; for 24"/25" rear wheels
Ambient conditions
Temperatures and relative humidity
Temperature during use [°C (°F)]
Invader 480S26=10000_K
1), 2)
2)
Custom fabrication
250 – 500
500
330
530
Overall width = seat width + 140 mm (at 1° camber);
160 mm (at 3° camber); 220 mm (at 6° camber)
Custom size
From 220
Custom size
Custom size
Custom size
30; 50; 80; 100
70 – 120 (depending on order)
3; 4; 5; 5 ½; 6
24; 25
12
8
4.5 (8 %)
4.5 (8 %)
4.5 (8 %)
120 (Invader; Invader Wave), 160 (Invader Heavy
Duty)
7–10
-10 to +40 (14 to 104)
Technical data
43