Adjusting The Posterior Lower Leg Pad On The Elevating Leg Support - Otto Bock Avantgarde 4 Instructions For Use Manual

Settings
59
Segmented footplate
1) Loosen the Allen head screw on the footplate suspension (see fig. 61).
2) Turn the footplate joint to the desired angle (see fig. 62).
3) Tighten the Allen head screw to 8 Nm.
61
Elevating legrest on Avantgarde DV
1) Loosen the countersunk screw on the foot plate (see fig. 63).
2) Turn the foot plate to the desired angle (see fig. 64).
3) Tighten the countersunk screw to at least 6 Nm (see fig. 63).
63

6.7.3 Adjusting the posterior lower leg pad on the elevating leg support

The posterior lower leg pad on this leg support is adjustable in height, depth, width and angle.
1) Height adjustment: Loosen the Allen head screws on the clamp brackets (see fig. 65, item 1). Slide the pos­
terior lower leg pad to the desired height and firmly retighten the Allen head screws.
26
60
62
64
Avantgarde 4