Table of Contents
Advertisement
Getting started
WHAT TO DO IF YOU FORGET YOUR PIN
If...
you are a common user
you are the administrator
EliTrace (optional)
FUNCTION AVAILABILITY
To access the EliTrace functions the EliTrace activation code must be
entered. The activation code is required only at the first access to
the EliTrace (
) menu: after the code was entered, the function is
enabled and there is no need to enter the code again.
To acquire the activation code please refer to the Activation code
instructions.
DESCRIPTION
EliTrace allows to exactly know which instruments are sterilized and
link them to a specific cycle.
ACCESS TO ELITRACE
For the EliTrace access proceed as follows:
On the homepage tap
1
Note: for more information see the dedicated documentation.
32
Then...
contact the administrator
contact your authorized service provider
>
>
USB pen drive
DESCRIPTION
A USB pen drive is available to be installed in order to automatically
record all the sterilization cycle reports. The USB pen drive can be
inserted equally into the front or rear port.
Notice: Periodically remove the USB pen drive to save the cycle data
on a computer or on another safe support.
FORMAT THE USB PEN DRIVE
On the homepage, tap
1
Insert the USB pen drive in one of the two USB ports.
2
Tap
.
3
Tap
to confirm: all data will be erased.
4
Notice: Formatting erases all data from the pen drive. Be sure you
have already saved your data on a safe support before formatting.
Standby mode
DESCRIPTION
When in Standby mode, the sterilizer display remains dark and the
sterilizer chamber is not heated to save energy. If the sterilizer is not
Lara XL | Instructions for Use | RIS-311 ENG Rev02 | 01/06/2022 | © W&H Sterilization Srl
>
>
Advertisement
Table of Contents
