W&H Lara RIS-311 Instructions For Use Manual page 68

Maintenance
CLEANING THE CHAMBER FILTERS
Proceed as follows:
Allow the sterilization chamber to cool down.
1
Empty the sterilizer chamber by removing the trays and the rack.
2
Remove the filters at the bottom of the chamber (bottom/center) by unscrewing
3
them.
Rinse the filters with tap water.
4
Insert the filters in their original position, screwing them into place.
5
CLEANING THE EXTERNAL SURFACES OF THE STERILIZER
Proceed as follows:
Clean all external sterilizer covers with a slightly damp cloth moistened with
1
water. For better cleaning results, clean with W&H MC-1000 cleaning solution.
Notice: never use any other disinfectant, detergent or abrasive product, as they
might result aggressive for the external covers and damage them.
68 Lara XL | Instructions for Use | RIS-311 ENG Rev02 | 01/06/2022 | © W&H Sterilization Srl