RESET A USER PIN
On the homepage, tap
1
Tap your user name.
2
Enter the PIN and tap
3
Tap
and the user name for which you want to reset the PIN.
4
Tap
to confirm: the PIN is set to "0000" and a confirmation
5
message appears.
Tap
to return to the homepage.
6
Note: Remember the user to change their PIN before reusing the sterilizer.
Traceability options
WHO CAN SET THE TRACEABILITY OPTIONS
Only a user with administrator rights can set the traceability options.
Lara XL | Instructions for Use | RIS-311 ENG Rev02 | 01/06/2022 | © W&H Sterilization Srl
>
>
to confirm.
SET THE TRACEABILITY OPTIONS
On the homepage, tap
1
Tap your user name.
2
Enter your PIN and tap
3
Tap the information to be requested to the users at the
4
beginning and at the end of the cycle.
If you want the user to check the load and release it as valid at
5
the end of the cycle, tap
Tap
to confirm and go back to the previous page.
6
Hide/Unhide a cycle
WHO CAN HIDE/UNHIDE A CYCLE
Only a user with administrator rights can hide a cycle or make it
available to users on the homepage.
>
>
to confirm.
.
Administrator
35