Operating The Sterilizer - W&H Lara RIS-311 Instructions For Use Manual

Getting started

Operating the sterilizer

POWER THE STERILIZER ON/OFF
Press the power switch behind
1
the service door: once
switched ON, the visual
indicator on the power switch
turns green.
After a quick autotest the sterilizer automatically turns in
2
Standby mode. See "Standby mode" on page 32.
Note: at the first start-up of the sterilizer, the Guided Configuration
procedure automatically appears; see "Sterilizer setup" on page 30
Tap . The homepage appears with the enabled sterilization
3
cycles.
24
HOMEPAGE DESCRIPTION
Lara XL | Instructions for Use | RIS-311 ENG Rev02 | 01/06/2022 | © W&H Sterilization Srl
Part Description
A Title/purpose of the screen,
or the cycle number and the
current date and time.
Available cycles.
B
Note: The S Fast 134 cycle is
optional, activated with Fast
Cycle activation code, see "S
Fast 134 cycle activation" on
page 53.
C Available tests.
D Additional buttons used to
navigate the menu.