Advertisement
Chapter 6 Method of Use
(9) Disconnect the connector of the water tank and cover the
feed water connector of the endoscope with your finger.
(10)
Press the button on the cleaning adapter CA-511N to
supply air until water in the air/water supply channel is
completely discharged.
6.5.5
Removing Endoscope from Processor
(1) Turn OFF the power switch of the processor and the light
source.
(2) Remove the suction tube and water tank from the suction
connector of the endoscope.
6-24
Do not touch the LG connector tip until it cools down (approximately 5
minutes).
Touching the LG connector with hands immediately after use of the
endoscope may cause a burn injury.
CAUTION
Advertisement
Chapters
