Advertisement
Chapter 5 Preparation for Use of Endoscope
5.2.2
Attaching Forceps Valve
(1) Visually check that the slits (a) on the lid and circular hole
(b) of the forceps valve are free from abnormalities such
as tears, cracks, deformation, discoloration and so on.
(2) Attach the forceps valve to the forceps inlet of the
endoscope.
(3)
Close the lid of the forceps valve.
5-6
Ensure that an appropriately reprocessed forceps valve is properly
attached to the forceps inlet.
If not attached, body fluid may flow back and it could be a source of
infection.
Be sure to inspect the forceps valve before attachment. If any
abnormality is found during inspection, do not use the product.
It could be a source of infection.
WARNING
(a)
(b)
Advertisement
Chapters
