Advertisement
<Electromagnetic Compatibility (EMC) Information>
This product is intended for use in the electromagnetic environments specified below.
The customer or the user of this product should assure that it is used in such an environment.
Electromagnetic emission compliance information and guidance
RF emissions
CISPR 11
Radiated emissions
CISPR 11
Harmonic emissions
EN 61000-3-2
Voltage fluctuations/
flicker emissions
EN 61000-3-3
[Note] Use in combination with VP-4450HD and XL-4450.
Emission standard
Group I
Class A
Class A
Applicable
Compliance
This product uses RF (Radio Frequency) energy
only for its internal function. Therefore, its RF
emissions are very low and are not likely to cause
any interference in nearby electric equipment.
This product is intended for use in medical
facilities and commercial facilities.
If this product is used in domestic establishments,
electromagnetic interference may occur on any
equipments.
In this case, it is recommended to use this
product according to Chapter 1 "Safety."
Appendix
Guidance
Appendix-5
Advertisement
Chapters
