Advertisement
Chapter 5 Preparation for Use of Endoscope
(6) Roll up the edge of the balloon, and slide the setting tool
(ST-05B) toward the control portion of the endoscope to
mount the balloon on the endoscope.
Return the edge of the balloon to the original form.
[Note]
Make the ethanol inside the balloon evaporate by widening
the end of the balloon.
[Note]
Handle the setting tool (ST-05B) without applying an
excessive force to it.
(7) Extract the air in the balloon and remove the setting tool
(ST-05B).
[Note]
Dispose of the setting tool (ST-05B) after use.
(8) Press the fixing rubber into the mounting fixture (ST-01B).
5-20
Advertisement
Chapters
