Advertisement
Chapter 1 Safety
Chapter 1 Safety
1. Precautions in Using Endoscope
1) Applicable processor and light source
2) Preparation and inspection before use
3) Combination of equipment
4) Prohibition of reuse
5) Expiration date for use
6) Preparation before use
1-2
This product is used in combination with processor VP-4450HD and light source XL-4450.
Prior to using this product, prepare a spare one to avoid unexpected accidents such as
equipment failure. If a replacement is not available, you may not be able to continue
endoscopic procedures.
Have this product inspected by medical specialists who have received proper training in
endoscopic procedures before use according to the procedures provided in this manual, to
avoid unexpected accidents, and take full advantage of the equipment's capabilities.
If the inspection result shows any abnormality, do not use the same equipment.
The endoscope may be used in combination with peripherals. To avoid an electric shock
accident, use only the peripherals that are described in this operation manual.
Read also the attached document and operation manual of the peripherals used in
combination with this product.
The Over-tube, balloon, setting tool ST-05B and forceps valve are intended for single
patient use. To prevent infection, do not reuse them.
Do not use Over-tube, balloon, setting tool ST-05B or forceps valve after its expiration date
has passed.
Use diathermic treatment equipment or an endoscope which can be used with diathermic
treatment equipment to provide proper emergency treatment, in cases of bleeding.
Advertisement
Chapters
