Your Receiver; Pin Code Default: 0000; Front And Side Panel; Rear Panel - Strong SRT 7030 User Manual

2.0 YOUR RECEIVER

2.1 PIN code default: 0000

2.2 Front and side panel

1. LED display:
2. Standby indicator:
3. IR Sensor:
4. Power button:
5. USB:

2.3 Rear panel

1. SAT IN
2. HDMI
3. TV SCART
4. Audio L/R
5. S/PDIF coaxial
6. Power connector The receiver requires a wall adapter, mains voltage input 100~240V AC

2.4 Remote Control

1. q
2. !
3. 0-9
4. TV/R
5. 
6. FAV
7. 9
8. AUDIO
9. INFO
10. EPG
11. pq
12. OK
13. t u
Shows channel number in operation and time in Standby
Shows power state of the receiver: RED LED - receiver is in standby mode
Receives commands from the remote control
Switch the receiver to Standby or On.
For connection of USB device for Multimedia use
To connect to the LNB of your satellite dish for reception of satellite broadcast
signal
To connect to the HDMI input of your TV using a good quality HDMI cable
To connect to TV using a SCART cable
To connect to an analogue amplifier for stereo audio
To connect to a digital or home cinema audio amplifier
50~60Hz 12V, 1.5A DC output. Please check the local power conditions before
connecting the receiver to the mains supply.
Turns the receiver ON/Standby
To turn the sound on or off
Channel number and numeric value input
Toggles between TV and radio mode
Same as MENU
To access your favourite channels. Toggles between available favourite groups
To switch between the last viewed channels
Displays the audio selection menu with selections for available languages and
audio modes
Press once to display channel number/name and current/coming
information. Press twice to display detailed event information. Press again to
view some technical details about the current channel.
Viewing mode: Displays the EPG (Electronic Programme Guide)
Switches to the next/previous channel in viewing mode, Menu: moving the
highlight up/down Teletext: Page up or down.
Viewing mode: Displays the channel list. Menu: activation of the highlighted
item
Decreasing/increasing the volume level in viewing mode/navigating through
the menus/changing values of settings in a menu. Media player: make steps
in program banner. Teletext: Scroll through subpages.
Fig. 1
Fig. 2
Fig. 3
5