Table of Contents
Advertisement
Problem
The external USB HDD
does not start.
The receiver
switches to standby
automatically.
9.0 SPECIFICATIONS
Demodulator
Demodulation:
Input symbol rate:
FEC decoder:
Video Decoder
Video Format
Input rate:
Aspect ratio:
Video resolution:
Audio Decoder
Audio decoding:
Audio mode:
Audio Support:
Sampling rate:
* Dolby Digital, Dolby Digital Plus and the double-D symbol are registered trademarks of Dolby Laboratories
Tuner
Type1:
Input frequency range:
RF impedance:
Signal level:
LNB power:
Switch versions:
LNB options:
Motor drive options:
System & Memory
Main processor:
Flash memory:
System memory:
Multimedia
Video playback:
Audio playback:
Possible cause
The power consumption is too
high.
The Auto Standby function is
activated and has reached the
set time (default 3h).
QPSK, 8PSK
DVB-S QPSK: 2 ~ 45 Ms/s
DVB-S2 8PSK/QPSK: 2 ~45 Ms/s
Auto, 1/2, 2/3, 3/4, 5/6, 7/8 in DVB-S mode
1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 in DVB-S2 mode
3/5, 2/3, 3/4, 5/6, 8/9, 9/10 in 8PSK mode
Mpeg1/2, H264 max 1080x1920...)
Max. 20 Mbit/s
16:9, 4:3 Pan&Scan, Letterbox, Auto.
480i, 480p, 576i, 576p, 720, 1080i, 1080p
50/60Hz.
MPEG-1/2 Layer 1 & 2, AC3, Dolby and Dolby Plus
Mono L/R, Stereo,
E-AC3, Dolby Digital, Dolby Digital Plus*
32, 44.1, 48 kHz
F Type, IEC169-24, Female
950 – 2150 MHz
75 Ohm unbalanced
-65 to -25 dBm
13/18 V DC (+/- 5%), max. 0.5 A, overload protected
DiSEqC 1.0, 1.1
Universal, SatCR (max. 8 users)
DiSEqC 1.2, GotoX (DiSEqC 1.3)
Ali M3510G
8 MB
64 MB
Supported in various formats and containers (MPG, MPEG,
TS, VOB, MP4, H264 (no H265) max 1080x1920.)*
MP3, Flac*
What to do
Connect an extra power supply adapter to
your USB HDD device.
Set the power down time or disable it in
the System Setup > Auto Standby menu.
29
Advertisement
Table of Contents
