Strong SRT 7030 User Manual page 26

YELLOW
GREEN
RED
* This user manual describes the full functionality including the recording function and may not be applicable if the software for recording
via USB has not yet been installed.
Video
Your receiver allows you to watch videos in the chosen folder. Choose a folder with video files for playing
them. Not all video files can be played.
During playback you can use the playback control buttons, such as 2, u t (while progress banner on
screen), 3, 5, 6, 7 and 8. You can check the file details by pressing the INFO button in full screen
mode. To close the banner, press INFO again or . Use the YELLOW] button and select a chapter with
pq you want to jump to, then press OK to confirm. With the 5 6 buttons you can rewind or forward
playback in x2, x4, x8, x16 and x24 speed. With the 7 8 buttons you can jump to the previous/next
video file.
This subtitle function with the SUB button only works for movies which have embedded subtitles
During playback, press (repeatedly) SUB to select a audio track.
Press  to remove the pop-up.
For external subtitle files in.srt format, select those with the GREEN button.
Music
Select a music file (or file in a folder) and press OK to start playback.
During playback, following functions are available:
Change the Audio volume
t u:
OK:
Start playback of the selected file.
To pause/resume playback
2:
To stop playback
3:
To rewind or forward playback. Press and hold the button. Release the button when
5 6:
you have reached the wanted position.
Start playback of the previous/next file. Press repeatedly to step
7 8:
Press  once if you want to leave the current folder. To get back to the Multimedia
:
menu, press  repeatedly
MENU: To go back to the main menu
Image
Your receiver allows you to watch a slide show with all available photos in the chosen folder. Choose a
folder with photo files for the slide show.
In the Image mode following functions are available:
To pause/resume slide show.
2
22
Marks a recording for deletion. When all recordings you want to delete are
marked, press  A message appears to confirm deleting.
A recording can be locked from viewing by the password. Enter the password
to set the lock. To unlock, repeat the procedure with the GREEN button. A
locked recording is signalled with a Lock icon.
Opens the keyboard for entering a new name for a selected recording. In the
keyboard, press pq t u for navigation, to enter a character press OK. After
finishing your changes, select OK and press the OK button to save the new
name. If you want to discard your changes select Cancel and then press OK.