First Time Installation; Dish Setup - Strong SRT 7030 User Manual

NOTE:
* This user manual describes the full functionality including the recording function and may not be applicable if the software for recording
via USB has not yet been installed.

4.0 FIRST TIME INSTALLATION

After all connections have been made properly, switch on your TV and make sure the receiver is
connected to the main power. If you are using the receiver for the first time or restored to factory default,
the Installation guide menu will appear on your TV screen. Use t u to select the OSD Language of your
preference. Set the other options as are appropriate for your situation. HDMI output is always available.
TV format with HDMI connection is 16:9 Wide screen.
NOTE:
You can continue to Channel search and install further channels assumed your dish is pointed at Astra
19° East and/or uses DiSEqC port 1. Or go directly to viewing mode by pressing OK to start enjoying the
pre-installed German channels immediately.

4.1 Dish setup

NOTE:
In depth explanations you will find in Chapter 7.
4.1.1 Installation
The Installation menu provides the satellite dish setup.
The menu allows you to set up Antenna Connection, Satellite List, Antenna Setup, Single Satellite search,
Multi Satellite Search and TP List.
Press the MENU button to enter main menu.
Press pq button to highlight "Installation", press
u button to enter the "Installation" menu.
Press p or q button to select the desired item and
press OK button to enter the sub-menu.
Press  button to exit.
4.1.2 Antenna Connection
Press t u button to select LNB. LNB includes Fixed Antenna and Motor Antenna.
8
Timeshift/recording and playback only works properly when a fast USB
storage device such as a USB2.0 HDD is connected to the receiver. Timeshift/
recording and playback of HD content requires a sufficient read/write speed
of the used USB storage device.*
If Germany is selected as country, a pre-installed channel list is available.
German channels from ASTRA 19.2E will be installed. A pop-up list will show
for selection of the preferred regional channel.
This chapter gives an overview of the possibilities for a quick setup.