Strong SRT 7030 User Manual page 28

Aspect Mode
You can set the display format to available settings Auto, 16:9, 4:3PS, (Pan&Scan) and 4:3LB (Letterbox)
Auto
16:9
4:3 Letterbox 4:3LB (Letterbox)
4:3 Pan&Scan 4:3PS (Pan&Scan)
Digital Audio Output
Using PCM mode is the best option if you do not have a TV or Digital Amplifier that are not able to
process Multi audio.
7.3.6 Local Time Setting
Press MENU and select Local Time Setting The menu provides options to adjust the time and date
settings.
Press pq to select an option and t u to adjust the setting. Press  to exit the menu.
Region
UTC Usage
UTC Offset :
Summer Time
Date:
Time:
7.3.6.1 Timer Setting
In this menu you can setup the schedule for automatic switching to the defined channels at a particular
date/time.
Timers can be set directly from the EPG window or manually from this screen. Not set timers will be
default Off
To enter a new timer manually, select an Off marked timer in the list and press OK.
24
With Auto select the TV connected with HDMI will auto-negotiate the optimal
setting.
For 16:9 TV screens. All programmes will fill the full screen. Content formatted
in 4:3 will be stretched.
For 4:3 TV screens. The unit will display all content in its original aspect ratio.
Programmes formatted in 16:9 will be presented with black bars on the top
and bottom.
For 4:3 TV screens.16:9 content will have the extreme left and right portions
cut off and presented full screen.
Select digital audio output mode. Settings affect both S/PDIF and HDMI
outputs.
PCM – audio from any format will be converted to PCM Stereo format
RAW – audio from receiver will be send out in the original format
Select the region or country in which you live. This will set the time offset from
UTC automatically.
Select By Region (the Region selection is valid), User Define (You may select
your UTC Offset yourself) or Off (Time and Date setting are free to adapt.)
However, the default By Region setting and the correct Region setting are
usually sufficient. In case the Daylight Saving Time should not be delivered by
the broadcaster, you can adapt it here.
Select the correct Time Zone in which you live.
You may adapt On or Off for Daylight Saving Time, should it not be delivered
by the broadcaster.
Enter the date when UTC Usage is set to Off.
Enter the time when UTC Usage is set to {Off.