Your Receiver; Default Pin: 1234; Front Panel; Rear Panel - Strong SRT 2221 User Manual

2.0 YOUR RECEIVER

2.1 DEFAULT PIN: 1234

2.2 Front Panel

1. Power switch
2. Status indicator:
3. IR sensor:
4. USB:

2.3 Rear Panel

1. ANT IN
2. ANT OUT
3. S/PDIF (optical)
4. LAN
5. HDMI
6. Power

2.4 Side Panel

1. SD card slot
2. USB:

2.5 Remote control

1. q
2. !
3. ASPECT
4. FAV
5. TV/RADIO
6. COLOUR BUTTONS
7.
8. 
9.
10. pq
11. tu
12. OK
13. VOL+/VOL-
To switch the receiver between ON/STANDBY modes.
Indicates status of reception and ON or OFF modes.
Receives Standby/On signal from the remote control.
For connection of the USB adapter of the remote control.
To connect to your antenna for reception of broadcast signals.
To connect the terrestrial antenna signal to your TV set.
To connect your receiver to an digital audio amplifier.
To connect to your router with a RJ 45 network cable.
To connect your receiver to your TV via HDMI cable.
To connect the included power adapter of 12 V.
To insert an optional SD card.
To connect USB devices like: mouse/keyboard/storage devices
Turns the receiver ON/Standby
Turns the sound on or off.
Switches between the screen settings "AUTO" and "Full".
Accesses the favourite channels lists.
Switches between TV and radio mode
Different functions in menu mode
Opens the DTV menu/selection of wall papers
Returns to the Android menu/shows the latest used apps
Returns to the previous menu or exits the App
Switches to the next/previous channel in viewing mode or moves
the highlight up/down in the menu.
Decreases/increases the volume level in viewing mode, navigates
through the menus or changes values of settings in a menu
Confirms a selection
Increases/decreases the volume level
Fig. 1
Fig. 2
Fig. 3
Fig. 4
5