Table of Contents
Advertisement
6.1.1 Direct access
To gain direct access to a certain channel, simply enter its number with the 0~9 keys on the remote
control. Channel numbers can be up to four digits long. Entering a number with less than four digits is
possible. Just wait a few seconds and your receiver will switch to the selected channel.
6.1.2 Channel list
Press OK in viewing mode to display the channel list. Use pq to highlight your channel of choice and
press OK once to select the highlighted channel. The channel list is equipped with a Find function to
make it easier to find channels. In the channel list, press RED and an alphabet banner will be displayed.
Use pqt u to select the first letter (or letters) of your channel of choice and select OK to confirm or
just press . All channels beginning with the chosen letter(s) will now be displayed. Select the channel in
the filtered list.
The following buttons are available in the channel list and in viewing mode:
If you have installed more than one satellite, toggle between their channel list. All TV
t u
will show all channels of all satellites in one long list.
RED:
Opens an alphabet banner to quickly find a channel
TV/R:
Toggles between TV and radio channels
6.1.3 Using the
pq
p will switch to a higher channel.
q will switch a lower channel.
6.1.4 Using the CH+/CH- buttons
CH+ will switch to a higher channel.
CH- will switch a lower channel.
6.1.5 Using the 9 button
Use the 9 button for switching between the two last viewed channels
6.2 Info Banner
At any time during viewing mode you can press the INFO button to get information about the current
channel as well as the current and following programme*. Press INFO twice to view detailed info of
current and following programmes and technical details about the current channel. Press INFO again or
to close the information.
You can change the on-screen duration of the info banner in the System Setup menu. Please refer to
section 7.3.6.1 OSD Setting for more details.
* Programme information is displayed when available. Availability depends on broadcast.
buttons
11
Advertisement
Table of Contents
