Strong SRT 7030 User Manual page 31

Factory Setting
Reset your receiver to the default factory settings.
Enter your password or the default password 0000, select Yes and press OK to confirm.
The receiver will reboot and start with the First Installation menu.
WARNING:
Upgrade by USB
Download the required update file for your receiver model from the support page on our website
www.strong.tv or contact your local dealer.
Unzip the file on your computer, if necessary, and copy it to root folder of your USB storage device. The
USB device must have been formatted in FAT32.
Connect the USB storage device to the USB port of the receiver. Press MENU and select Tools, then
Upgrade By USB to update the software select at Upgrade Mode the option Allcode. At Upgrade File select
the correct upgrade file, the file has the extension abs.
Then select Start, and press OK to initiate the upgrade process. An attention banner will now be
displayed. Press OK to confirm Yes the update (or No to cancel it). The update process will take some
time. After the update process has been completed the receiver will restart and then how the first
channel in the TV list. You can now safely remove the USB device, and then remove update software from
the device (at the PC), to prevent accidental updating again.
WARNING:
NOTE:
The bootlogo and Radioback are for Strong internal use.
7.3.7 Dump channel list
7.3.7.1 DB Management
This menu allows you to save and reload the channel Data Base of your receiver from/to a USB-device.
This very convenient feature enables you to save your personal settings like Channel-, Favourite-, Sat-
and TP-lists on an USB storage device and load them back to the receiver later.
Write to USB Dump Channel list
Select Update Mode, then Dump channel list and Start and press OK to make a backup of the data base,
including channels and user set data. An.udf file with the current time, date (day, month, year), will be
created on the USB device. When the database has been successfully stored a message will be displayed
on screen. Press  to leave the menu.
A factory reset will permanently delete all your personal settings, timers and
stored channels. Please consider this before you perform a factory reset.
NEVER power off the receiver or remove the USB device during the software
update process. Doing so might cause irreparable damage to your receiver
and will void your warranty.
In certain instances it can be advised on the website to upgrade the unit
with the Maincode option in stead of Allcode.
27