Your Receiver; Default Pin: 1234; Front Panel; Rear Panel - Strong SRT 8115 User Manual

2.0 YouR RECEIvER

2.1 dEfAulT PIn: 1234

2.2 front Panel
1. 4 digits display
2. uSb
3. IR sensor
4. mode indicator
2.3 Rear Panel
1. AnT In
2. To Tv
3. S / PdIf
4. hdmI
5. Tv SCART
6. video Connector
7. Audio l/R Connector
8. Power Cord
2.4 Remote Control
1. q
2. !
3. Pg+/Pg-
4. dTv/vCR
5. Info
6. vol+/vol-
7. mEnu
8. EXIT
9. pq
4
Indicates current time in STANDBY mode
Indicates current channel number in OPERATING mode
Connector for USB storage devices.
Point your remote control towards this sensor.
RED indicates that the receiver is in STANDBY mode.
GREEN indicates that the receiver is in OPERATING mode.
To connect to your antenna for reception of broadcast signals.
To connect to the terrestrial antenna input of your TV set. This
connection will allow you to watch digital terrestrial programmes
depending on the tuner of your TV.
Coaxial To connect your receiver to a digital home theatre, AV
receiver or digital audio amplifier.
To connect your receiver with your TV set using an HDMI cable.
To connect your receiver with your TV set using a SCART cable.
To connect your receiver with your TV set using an RCA cable.
To connect your receiver with your TV set using an RCA cable.
Your receiver requires a voltage of 220~240V AC (Auto-
selectable), 50/60Hz ±5%. Please ensure the local power
specification meets these requirements before connecting your
receiver to the wall outlet.
S witches the receiver On/Standby
M utes all audio outputs of the receiver
Page up/down in all list modes
No function
Opens the current channel information; 2x opens the current
event information and 3x the signal information
Increases/decreases the volume level
Opens the main menu, in any menu you will get one step back
Exits from the menu or sub-menu
Menu Off: Change channel to previous/next.
Menu On: Moves the cursor up/down.
PART 1 • English
Fig. 1
Fig. 2
Fig. 3