Table of Contents
Advertisement
Slide Rail Kit for Sun StorageTek 5320 NAS
Appliance
Field installation of the Sun StorageTek 5320 NAS Appliance in the Sun Fire™
Hardware Expansion Cabinet and third-party ANSI/EIA 310-D-1992 or IEC 60927
compliant cabinets is supported with the slide rail kit (370-7669-02) and cable
management arm (370-7668-02).
The slide rail kit is a 4-point mounted slide rail kit and is designed to enable the Sun
StorageTek 5320 NAS Appliance to be racked in the Sun™ Rack 900, the Sun Rack
1000, and third-party ANSI/EIA 310-D-1992 or IEC 60927 compliant racks. No other
kits are available to allow 2-point, front-mount, or mid-mount configuration.
The slide kit includes hardware that enables mounting to any of the following types
of rack rails:
6 mm threaded holes
■
No. 10-32 threaded holes
■
No. 10 clearance holes
■
Square unthreaded holes per EIA and IEC standards listed above
■
Preparing for the Installation
Use the following procedures to prepare for installation:
"Before You Begin" on page 13
■
"Grounding Procedure" on page 14
■
"To Prepare the Server Rackmount Kit" on page 15
■
"To Prepare the Server" on page 16
■
"To Prepare the CAM100 3RU Rackmount Kit" on page 16
■
"To Prepare the Controller and Expansion Enclosures" on page 17
■
"To Prepare the Cabinet" on page 18
■
Before You Begin
Before you begin rackmounting, do the following:
Check that the maximum ambient operating temperature in the rack does not
■
exceed 95˚ F (35˚ C).
Chapter 2 Installing Servers and Back-End Storage
13
Advertisement
Table of Contents
